STEPAN EUROPE – Voreppe
Rules/Standards: FM Global
Assignment: Basic preliminary design.
Find out more about our assignment
Basic preliminary design for fire protection at the Stepan Europe workshops in Voreppe (near Grenoble). The main aim of this project is to install a sprinkler system in workshops C and G (400 and 300 sq.m respectively).
- Preliminary design.
- Basic design of the various conceivable solutions (sprinkler, deluge, etc.).
- Pre-dimensioning design calculations (flow rate, pressure, manifold diameters) for each system.
- Process flow diagrams and basic engineering drawings.
- Budget analysis.
MERCK – Calais and Meyzieu
Rules/Standards: NFPA and FM Global
Assignment: Detailed preliminary design and EPCM
Find out more about our assignment
Engineering mission for the installation of fire detection and protection systems at the Merck sites in Calais and Meyzieu, near Lyon.
- Detailed designs.
- Preparation of tender documentation.
- Assistance with the contractor selection process.
- Construction and Management.
ARKEMA – Mont
Rules/Standards: NFPA 11, 13 et 15
Assignment: Technical assistance and design.
Find out more about our assignment
Technical assistance in relation to the planned alterations to the fixed fire protection installations for the Orgasol unit at the Arkema factory in Mont (SW France).
- P&ID of the fire protection system.
- Design of the foam system.
- Dimensioned isometric drawings of the fire protection system.
- Hydraulic design calculations.
- Design optimisation based on results of the hydraulic calculations.
- Definition of specific equipment: valves, foam concentrate storage and proportioning system.
- Definition of the fire detection, controller and alarm transfer systems.
CHEVRON ORONITE – Le Havre
Rules/Standards: NFPA
Assignment: Basic preliminary design for budgeting.
Find out more about our assignment
Basic preliminary design of fixed, water-based fire protection installations for the Chevron Oronite site in Le Havre. The purpose of this study is to provide Chevron Oronite with a cost estimate to be used as a basis for the firm’s application for funding to upgrade its fire protection installations over the 2015–18 period.
- Basic preliminary design.
- Routing plan and layout.
- Hydraulic design calculations.
- Itemised budget estimate.
ORIL INDUSTRIE – Bolbec
Rules/Standards: NFPA and ICPE
Assignment: Engineering
Find out more about our assignment
Budget analysis for the fire protection of buildings F26 and F32, and solvent storage tank farms RT61 to RT 66 at the Bolbec facility in Normandy.
- Detailed drawings of piping systems.
- Hydraulic design calculations.
- Writing of technical specifications and equipment definition.
- Site work follow-up and acceptance of the installations.
BASF – Clermont de l’Oise
Rules/Standards: APSAD
Assignment: Basic preliminary design phase
Find out more about our assignment
Basic preliminary design relating to the thirty-year review to restore compliance of the automatic water sprinkler-type protection installations in warehouse D210 at the BASF site in Clermont-de-l’Oise (north of Paris).
- Result of the initial audit (summary tables listing the discrepancies between the current installations and the new reference standard).
- Zoning plan of risks and control valves.
- Verification of site coherence.
- Basic design of the various conceivable technical solutions.
- Process flow diagrams of the planned solutions.
- Budget estimate of the various solutions.
- Technical/economic comparison chart highlighting the advantages and drawbacks of each solution.